Mixers that work with MixEmergency

djClint

anyone tried to map to pioneer djm 750?

djClint

well pioneer djm 750 works...my previous midi settings from djm 700 still work...i didnt midi map anymore

Nick

Cool - thanks.

lafiesta

hi nick i can't record with akai amx... any suggestion?

Nick

Unfortunately the Akai AMX isn't capable of recording direclty via the USB connection. Because of this, you will either need to: 1) If you have an older Mac with an audio-input, connect the Output of your Akai AMX to the line-in input 2) Record via a secondary audio-interface (again, connected to the Output of your Akai AMX) 3) Record within Serato DJ, and then line up the recording afterwards in a video editor and export it from this (or, if you know a bit about video formats/applications, you may be able to substitute the audio directly into the video container)

lafiesta

very sad… Thanks for your availability

djpoproxxx

Just a question on the new development of "Club Kit" mixers with the new Serato DJ 1.7.4 : Will there be some possible development with ME (or Serato DJ for that matter) to be able to choose which channels on the mixer you can use for video? I know video is normally channels 1 & 2 by default, but when using a Pioneer 900Nexus with Serato DJ Club Kit and turntables you are forced to use channels 1 & 4 (as these are the only phono inputs on the mixer). Even with using the new setup features of primary deck placement in Serato DJ: Whether you use SDJ channels 1 & 4 (normal setup primary deck placement 1 & 2) or use SDJ channels 2 & 4 (secondary setup primary deck placement 2 & 3), you'll only get video out of channel 1 when using normal setup primary deck placement 1 & 2.

Nick

Good question. Unfortunately I have no control over the channel assignments - that's something that is controlled via Serato DJ. I would suggest that you contact them about this.

djpoproxxx

Ok. They already know about this as well and said they're working on it for the next release (not 1.7.4). Just wanted to make sure both parties knew about this. Thanks for the clarification

Nick

Cool :)

jamezbrown_dupicate

Allen & Heath Xone DB2, works awseomly well with mixemergency and serato Dj 1.7.5 (via clubkit). :)

Nick

Thanks :)

aftashok1200

not sure if added, the American Audio 14 & 10 MXR mixers work with Mix Emergency, right out the box, no need to even midi map the fader on the MXR. Not sure if it works with a after market installed InnoFader however....

Nick

Thanks

djslimsmallz

Numark Ns7 2 mix emergency only active on one channel...What could be the problem?

Nick

Which channels are you using? Perhaps you can change the "Primary Decks" setting in Serato DJ?

djquartz

If you get your hands on a DJM-S9, please report your findings. I'm assuming it will work because the controls will be mapped to Serato DJ.

Swizzle

Hi Nick, Is the Pioneer DDJ-SR able to work with Serato DJ/ME?

Nick

Yes.

Swizzle

Thanks @Nick

« Previous Page Next Page »