Mixers that work with MixEmergency

iamdjstev

hi, pls i have the pioneer djm 700, a midi cable, and i use a macbook pro alonge wit ME 2.7.0, the thing is when i try to midi map it, it doesnt work, i have tried severally to midi map the cross fader. pls give me detailed instructions as to how to midi map the mixer, note, the midi/usb just shows a single light unlike tutorial videos i have seen that shows 2 lights of which one was blinking. thanks

DarKen

If I'm not mistaken, the djm700 is not equipped with a USB midi interface like the djm900nexus. Could you be a bit more specific as to how your midi connection is setup? Are you using a midi interface that plugs into the midi out of the djm and into the macs USB port? Or are you using just a straight midi cable from the mixer into your soundcard (USB or FireWire soundcard). In both cases, you need to make sure that your input and output routing is setup correctly within ME's midi connection options.

iamdjstev

the djm700 has a midi out port, and i am using a midi to usb like the types i saw on you tube used in midi mapping djm700/800 to ME or SL.

Nick

I would recommend downloading this app: http://www.snoize.com/MIDIMonitor/ It allows you to view incoming MIDI messages. Can you please run it and check that you are in fact able to recieve the correct messages.

joshfrazetta

Ok I revived my new Rane 64 today I upgraded from the Rane 68 Im having issues getting mix emergency to work with with CH 3 & 4 with the video output it works perfect with CH 1 & 2 any ideas?

Nick

I believe that it's only possible to use channel 1 and 2 due to limitations of Serato DJ.

C2WC

I am thinking about getting a Vestax VCI-400 and was wondering if it is possible to map ME to 2 of the channels (using the fader, EQ and filter knobs to control ME) and leave the other 2 channels for Serato DJ and avoid getting an aditional controller just for ME. Thanks in advance.

Nick

Yep, that should be fine. Two of the channels are coded directly to control MixEmergency's videos (i.e. the loading/playing). Anything else can be MIDI mapped separately.

C2WC

That is great, thanks Nick.

Dokumentary

Does anyone know if the "new" DJ-Tech dif-1m has MIDI on the faders? The website says it has "Midi Buttons and Midi Knob". http://www.djtechpro.com/eng/product-details.php?id=5

DJSiete

Can i use the Pioneer DDJWeG03 with ME? I am using ME with the TTM57SL, and two Technics 1210M5G, but i want to buy the little controller to set cue points, loops and all that stuff. The DDJWeGo3 is Serato DJ compatible, Even the DDJWeGO or can you guys recommend another small controller? I also have the Novation Twitch but i do not like it, its collecting dust, till gets a new home.

Nick

I haven't used this controller specifically, but if it sends MIDI from the crossfader, then you'll be able to use it. I think that all the Serato DJ compatible hardware should work fine with MixEmergency.

djClint

anyone tried to map to pioneer djm 750?

djClint

well pioneer djm 750 works...my previous midi settings from djm 700 still work...i didnt midi map anymore

Nick

Cool - thanks.

lafiesta

hi nick i can't record with akai amx... any suggestion?

Nick

Unfortunately the Akai AMX isn't capable of recording direclty via the USB connection. Because of this, you will either need to: 1) If you have an older Mac with an audio-input, connect the Output of your Akai AMX to the line-in input 2) Record via a secondary audio-interface (again, connected to the Output of your Akai AMX) 3) Record within Serato DJ, and then line up the recording afterwards in a video editor and export it from this (or, if you know a bit about video formats/applications, you may be able to substitute the audio directly into the video container)

lafiesta

very sad… Thanks for your availability

djpoproxxx

Just a question on the new development of "Club Kit" mixers with the new Serato DJ 1.7.4 : Will there be some possible development with ME (or Serato DJ for that matter) to be able to choose which channels on the mixer you can use for video? I know video is normally channels 1 & 2 by default, but when using a Pioneer 900Nexus with Serato DJ Club Kit and turntables you are forced to use channels 1 & 4 (as these are the only phono inputs on the mixer). Even with using the new setup features of primary deck placement in Serato DJ: Whether you use SDJ channels 1 & 4 (normal setup primary deck placement 1 & 2) or use SDJ channels 2 & 4 (secondary setup primary deck placement 2 & 3), you'll only get video out of channel 1 when using normal setup primary deck placement 1 & 2.

Nick

Good question. Unfortunately I have no control over the channel assignments - that's something that is controlled via Serato DJ. I would suggest that you contact them about this.

« Previous Page Next Page »