Recording

djrudee

Hey i had a question, were do you find the recording menu at? Do you have to be connected to Serato in order to see the recording menu?? Thanks .. Dj RuDee..

djrudee

never mind i found it thanks..

djrudee

HEY I JUST RECENTLY TRIED TO RECORD A VIDEO MIX. WHATS THE SETTING I NEED TO PUT IT ON TO RECORD THE AUDIO AS WELL WITH THE VIDEO FORMAT?? ON THE DEVICE: WHAT ONE DO I CHECK? AND THE FORMAT: WHAT DO I SET THAT AS & ABOUT THE CHANNEL?? IT RECORDED THE VIDEO MIX, BUT NO AUDIO STREAM. ALSO I NOTICED THAT WHEN I WAS RECORDING THE BAR THAT SHOWS A GREEN EQ WASNT ON .. SO THEIR FOR I THINK THATS WHY NO AUDIO WASNT TRASNFERED? IF YOU COULD PLEASE HELP ME THANKS..

Nick

You need to run a cabled from your mixer into your computer's audio line-in port. The select "Built-in inpu" in MixEmergency as the audio input device. Make sure that the audio level registers on the audio level meter before you begin recording. The default settings for the audio format (Apple Lossless) and channels (1 and 2) should be fine.

djrudee

Ok thanks whats the cable called that I need to run from my mixer I have a Djm 700.

Nick

You need the RCA to stereo 1/8" cable.... like this: http://www.amazon.com/3-5mm-Mini-Plug-Computer-Stereo/dp/B000FEHO0U

djrudee

One more question sorry, what input do I hook up the RCA to my pioneer dim 700?? What channel??

Nick

ecad? I'm not sure what you mean.... but there will be an RCA output from your mixer (usually either named external/booth/master) that you connect to the audio line input of your MacBook (just make sure you connect to the line-in input, and not the headphone output).

vdjmarco

I have the rane 68 where I connect the RCA

djphenominal

the djm-700 has a set of RCA jacks labeled rec. out or record out. plug your RCA to 1/8" cable into the mixer on the RCA end and your laptops mic input on the 1/8" end. after that follow Nicks instructions on setting up the laptop to record